To asist you with your system design, the chart below lists the range of transducer frequencies commonly served by each Pulser-Receiver model.  Please contact us for details on the specific performance features of a particular model.

Selection Guide

Description Receiver 3dB Cutoff Frequency Recommended Transducer Frequencies Applications Transducer Excitation Pulse Similar To / Replaces
PureView-La1 100 MHz 2 to 65 MHz Intravascular Ultrasound, acoustic microscopy, portable NDT systems Impulse / Spike  
PureView-Lb2 100 MHz 0.5 to 40 MHz Intravascular Ultrasound, medium-frequency acoustic microscopy, portable NDT systems Impulse / Spike  
PureView-Hb3 300 MHz 40 to 165 MHz Intravascular Ultrasound, high-frequency acoustic microscopy, portable NDT systems Impulse / Spike  
PureView-Ua1 500 MHz 100 to 350 MHz Very high-frequency acoustic microscopy Impulse / Spike  
DPR300 with 475V Pulser, 35MHz BW 35 MHz 700 kHz to 23 MHz Ultrasonic NDT/NDE, thickness gauging, ultrasound research, transducer evaluation. Impulse / Spike Olympus/Panametrics 5052, 5072PR
DPR300 with 900V Pulser, 35MHz BW 35 MHz 700 kHz to 23 MHz Applications involving attenuative materials. Impulse / Spike Olympus/Panametrics 5058PR
DPR300 with 475V Pulser, 50MHz BW 50 MHz 700 kHz to 33 MHz Ultrasonic NDT/NDE, thickness gauging, ultrasound research, transducer evaluation. Impulse / Spike Olympus/Panametrics 5073PR
DPR300 with 900V Pulser, 50MHz BW 50 MHz 700 kHz to 33 MHz Applications involving attenuative materials. Impulse / Spike  
DPR300 with 475V Pulser, 60MHz BW 60 MHz 700 kHz to 40 MHz Ultrasonic NDT/NDE, thickness gauging, ultrasound research, transducer evaluation. Impulse / Spike  
DPR300 with 900V Pulser, 60MHz BW 60 MHz 700 kHz to 40 MHz Applications involving attenuative materials. Impulse / Spike  
DPR500 with L01 Receiver 50 MHz (Note1) 1 to 33 MHz Computer controlled imaging and measurement systems, acoustic microscopy. Requires Remote Pulser  
DPR500 with H01 Receiver 500 MHz (Note1) 40 to over 250 MHz Very high-frequency acoustic microscopy, materials analysis, and transducer evaluation. Requires Remote Pulser Olympus/Panametrics 5910PR
DPR500 with H02 Receiver 300 MHz (Note1) 40 to 200 MHz High-frequency acoustic microscopy, imaging, materials analysis, and transducer evaluation. Requires Remote Pulser Olympus/Panametrics 5900PR
DPR500 with H04 Receiver 300 MHz (Note1) 20 to 200 MHz High-frequency acoustic microscopy, imaging, materials analysis, and transducer evaluation. Requires Remote Pulser Olympus/Panametrics 5900PR
DPR500 RP-L Remote Pulser Family 100 MHz 1 to 65 MHz Refer to the DPR500 page for Remote Pulser Specifications Impulse / Spike  
DPR500 RP-H Remote Pulser Family 250 to 300 MHz (Model dependant) 40 to 165 MHz Refer to the DPR500 page for Remote Pulser Specifications Impulse / Spike  
DPR500 RP-U Remote Pulser Family 300 to 375 MHz (Model dependant) 100 to 200 MHz (typ) Refer to the DPR500 page for Remote Pulser Specifications Impulse / Spike  
Note 1)  The overall signal-channel bandwidth will be the lesser of the Receiver bandwidth and the bandwidth of the attached remote Pulser.